虚拟化 频道

SCVMM 2008动手实验之虚机硬件角色配置

  【IT168 虚拟化频道】较之前版本,SCVMM 2008 R2版本主要亮点体现在六个新增功能:存储迁移、实时迁移队列、快速配置、主机兼容性检测、支持第三方CFS文件格式、支持Veritas卷管理器。通过本系列动手实验室,您可以了解到:如何安装 System Center Virtual Machine Manager、如何配置虚拟机硬件、主机和用户角色。

  本文阐述如何配置虚拟机硬件、主机和用户角色。

  一、配置主机

  任务A:将一个主机添加到VMM控制台中

  步骤:

  1. 关闭 Server Manager 窗口.

  2. 在桌面, 双击 SCVMM Adm在 Console.

  3. 出现Connect to Server对话框 . 点击Connect.

  4. 点击 Hosts 视图, 在 Actions 面板, 点击 Add hosts.

  5. 出现 Add Host 向导 . 在 Select Host Location 页面, 在 Password 区域, 输入 Pass@wrod,  点击 Next.

  6. 在 Host Servers 页面, 点击 搜索.

  7. 出现 Computer 搜索 对话框, 点击 搜索.

  8. 出现搜索结果, 点击 VMM.contoso.com,  点击 Add.

  9. 点击 OK,  点击 Next.

  10. 在Virtual Machine Manager 对话框. 点击 Yes.

  11. 在 Configuration Settings 页面, 在 Add  selected hosts to follow在host group 列表中, 点击 All Hosts,  点击 Next.

  12 .在 Host Properties 页面, 同意默认设置, 并且点击 Next.

  13. 在 Summary 页面, 点击 Add Hosts.

  14. 出现 任务 窗口. 监视状态直到任务完成。.

  15. 结束后,关闭任务窗口.

  任务B:增加一个叫做Virtual Network 2008的虚拟网络

  步骤:

  1. 在主机视图,在 结果 面板, 双击VMM.contoso.com.

  2. 出现Host Properties for VMM.contoso.com 对话框. 点击  Network在标签.

  3. 在工具栏中找到 Virtual switch, 点击 Add.

  4. 在 Name 区域, 输入  Virtual Network 2008,  点击 OK.

  任务C:在VMM中配置智能放置设置

  步骤:

  1. 在 Administration 视图, 点击 General.

  2. 在 Results 面板, 双击 Placement Settings.

  3. 将CPU utilization 调整至 highest increment of importance.

  4. 将Network utilization 调整至 middle increment,  点击 OK.

  结果: 在这个练习后, 您的VMM 服务器将作为主机出现在VMM管理员控制台中。一个名字叫做Virtual Network 2008的虚拟网络被建立好,并且智能放置设置已经被配置为CPU为最高优先级,网络为中级优先级。

 

  二、配置虚拟机硬件

  任务A:建立硬件配置文件

  步骤:

  1. 点击 Library 视图, 点击 Profiles.

  2. 在 Library Actions 面板, 点击 New hardware profile.

  3. 出现 New Hardware Profile 对话框. 在  Name 区域 输入FileServer.

  4. 点击 Hardware Settings 标签,  在  左侧 面板 点击 Network Adapter 1.

  5. 点击 Remove.

  6. 在顶部工具栏 点击 Network Adapter | Syntic network adapter.

  7. 在 左侧 面板, 点击 Processor,  在 details 面板, 点击 2,  点击 OK.

  8. 在 Library Actions 面板, 点击 New hardware profile.

  9. 出现 New Hardware Profile 对话框. 在  Name 区域 输入 SCSI High Availability.

  10.  点击 Hardware Settings 标签,  在顶部工具栏点击 SCSI Adapter.

  11.  在 左侧 面板, 点击 Availability,  在 details 面板 点击 Make this VM highly available, 点击 OK.

  任务B:使用硬件配置文件建立带有空白磁盘的虚拟机

  步骤:

  1. 点击 Virtual Machine 视图, 在  Actions 面板, 点击 New virtual machine.

  2. 出现 New Virtual Machine 向导 . 在 Select Source 页面, 点击 Create  new virtual machine with a blank virtual hard disk  点击 Next.

  3. 在 Virtual Machine Identity 页面, 在  Virtual machine name 区域 输入 File Server,  点击 Next.

  4. 在 Configure Hardware 页面, 在  Hardware profile 列表, 点击 FileServer.

  5. 点击 Next.

  6. 在 Select Destination 页面, 检查 Place  virtual machine on a host 被选中 点击 Next.

  7. 在 Select Virtual Machine Host 页面, 点击 Customize Ratings….

  8. 出现 Customize Ratings 对话框. 将所有的资源选项调整到 second highest in crement of Very Important,  点击 OK, 点击 Next.

  9. 在 Select Path 页面, 同意默认配置, 点击 Next.

  10. 在 Select Networks 页面, 在 Virtual Network 列表中, 点击 Internal Network,点击 Next.

  11. 在 Additional Properties 页面, 同意默认配置,  点击 Next.

  12. 在 Summary 页面, 点击 建立.

  13. 出现任务窗口. 关闭窗口.

  14. 点击 Virtual Machine 视图, 在  Actions 面板, 点击 New virtual mach在e.

  15. 出现 New Virtual Machine 向导 . 在 Select Source 页面, 点击 Create  new virtual machine with a blank virtual hard disk  点击 Next.

  16. 在 Virtual Machine Identity 页面, 在  Virtual machine name 区域 输入 SCSI,  点击 Next.

  17. 在 Configure Hardware 页面, 在  Hardware profile 列表, 点击 SCSI High Availability,  点击 Next.

  18. 在 Select Destination 页面, 点击 Store  virtual machine in library,  点击 Next.

  19. 在 Select Library Server 页面, 同意默认配置,  点击 Next.

  20. 在 Select Path 页面, 点击 Browse

  21. Select Destination Folder 对话框. 展开 MSSCVMMLibrary, 点击 VHDs,  点击 OK,  点击 Next.

  22. 在 Summary 页面, 点击 建立.

  23. 出现任务窗口. 关闭窗口.

  任务C:使用筛选器浏览现在的任务

  步骤:

  1. 点击 Jobs 视图, 点击 Status.

  2. 选择 Running.

  3. 选择 Completed.

  结果: 在这个练习后, 您应该在库的配置文件中拥有两个硬件配置文件。已经建立了两个虚拟机,一个已经停止并存在在主机上,或者存在在库中。当检查任务时,您应该看到一个正在运行和另一个已经结束。在某些情况下,由于服务器的速度,您可能看不到正在运行的,您只需注意完成提示。

0
相关文章